You are not logged in.
Pages: 1
Now that my character is complete, I'm focusing on making levels. I'm trying to learn to use Alexandre's Rapid Brickset editor 2 for making bricksets.
I'm using this for the first stage:
https://photos.app.goo.gl/dVSnoSXeER9XOxZd2
Unfortunately, I don't know how to use the angle arrows on the program but I know the rest of options (Passable, cloud, etc)
Some tutorial would be nice, since the one on the wikia seems to be down.
Offline
The arrows adjust the angle of the brick. Since there's only arrows pointing in eight directions, the results may not be accurate enough to make the slope work properly, and you'll end up adjusting the angle manually in the .brk file later.
Last edited by SGWaS (2018-02-24 18:16:45)
-SGWaS
Offline
The arrows adjust the angle of the brick. Since there's only arrows pointing in eight directions, the results may not be accurate enough to make the slope work properly, and you'll end up adjusting the angle manually in the .brk file later.
Ok, but what should I do to make this for the loops?
Offline
The arrows on the inside go counterclockwise in a circle like the loop, whereas the outside arrows are straight arrows.
Last edited by SGWaS (2018-02-24 18:26:14)
-SGWaS
Offline
The arrows on the inside go counterclockwise in a circle like the loop, whereas the outside arrows are straight arrows.
Understood, thank you
Offline
Pages: 1